Same Output, a Fraction of the Runtime: Four SAP Performance Case Studies
Year-end and statutory runs are close, and runtime problems surface at the worst moment. SAP HANA Performance Tuning is often the fix, yet a report that took four hours in March can still take nine in December while nobody can close the books. This post walks through four anonymised SAP performance case studies from 2iSolutions US, plus the parity proof behind each one. The focus is work that cuts runtime while leaving functional output untouched. All results below are vendor-reported, so verify the details with the vendor before you plan around them.
What Do These Four SAP Performance Case Studies Show?
Across four industries, the same pattern repeated. Teams cut runtime sharply without changing what the reports, billing runs, or statutory files produced. Results ranged from over 60% to up to 99% faster. In each case, parity checks confirmed that outputs matched before and after the change.
Here are the four results at a glance:
- A footwear manufacturer: up to 99% faster SAP reporting.
- A cement producer: up to 80% faster ABAP reports.
- A steel producer: 70% faster dispatch and billing.
- A manufacturer: over 60% faster statutory reporting.
These numbers come from the vendor, 2iSolutions US, and not from an independent audit. That matters. Treat them as evidence of what a disciplined method can do, then ask for the underlying detail.
The company has delivered SAP work in the US since 2005, and these engagements reflect that history. None of the four involved a rebuild or a new system. Each one targeted code, data access, and database behaviour inside the existing environment.
Why parity matters more than speed
A fast report that returns different numbers is worse than a slow one. Finance leaders know this instinctively. So every result here rests on a parity proof, which is a documented comparison showing that the new output matches the old output line for line.
Speed is the headline. Parity is what lets your auditors sign off. Without it, a tuning project turns into a reconciliation project, and that costs more than the runtime you saved.
What the four projects had in common
Each team started with measurement, not guesses. Slow jobs were ranked by total runtime, which means duration multiplied by how often the job runs. A ten-minute report that 50 users run every hour burns far more system time than a two-hour monthly job.
Changes also stayed small and reversible. Every fix shipped separately, so a failed parity check pointed to one change and not twelve. That discipline sounds dull. It is the reason the results held up.
Teams also treated this work as part of a wider push toward Enterprise Digital Excellence, which means running core processes faster and more reliably without adding risk. Faster reports are only one piece. Stable closes and trusted numbers matter just as much.
How Did a Footwear Manufacturer Reach Up to 99% Faster Reporting?
The footwear manufacturer cut reporting runtime by up to 99% by changing how reports read data, without touching report logic or results. Large reports were pulling far more records than they needed. Narrowing those reads removed most of the wait.
Footwear is a high-volume business. Thousands of styles, sizes, and colours generate enormous line-item data. Reports that scanned all of it on every run punished the database, and users felt it every morning.
The work followed a repeatable path:
- Trace the slowest reports and rank them by total runtime.
- Find where each one spends its time, whether in code or in the database.
- Rewrite the expensive reads so they fetch only what the report displays.
- Run the old and new versions side by side on the same data.
- Compare outputs and sign off only when they match.
The "up to" wording is deliberate. The biggest gain came from the worst offenders, and smaller reports improved by less. Still, the pattern is useful. A handful of reports usually cause most of the pain.
What the parity proof looked like
The team ran both versions against a frozen data snapshot. Totals, row counts, and sampled records all had to agree. If a single figure differed, the change went back for rework.
For a sales analyst, the result felt simple. The same report opened, showed the same numbers, and finished before the coffee cooled. Nobody had to relearn a screen or trust a new layout.
How Did a Cement Producer Speed Up ABAP Reports by Up to 80%?
The cement producer sped up its ABAP reports by up to 80% by fixing inefficient code and database access patterns. ABAP is SAP's programming language, and custom reports written in it often grow slow as data volumes climb. The business logic stayed exactly as it was.
Cement plants run on tight margins and heavy logistics. Plant managers need production, stock, and dispatch figures at the start of every shift. When those reports lag, decisions lag with them.
Where the time was going
Custom reports often loop through records one at a time and call the database again on each pass. That pattern works fine with a small table. It collapses when the table holds years of history.
The fixes were mostly ordinary. Teams moved filtering closer to the database, removed repeated lookups, and cut redundant sorting. None of this is glamorous, but it is where runtime hides.
Where database tuning fits
If your system runs on SAP's in-memory database, the same logic applies at a different layer. SAP HANA Performance Tuning means adjusting queries, table design, and memory use so the database does the heavy lifting efficiently. Code that pushes calculations down to the database usually runs far faster than code that pulls rows up to the application server.
That is why code and database work belong together. A tuned database cannot rescue a report that fetches everything, and clean code cannot rescue a poorly configured database. The cement project addressed both sides, then confirmed that every plant report matched its earlier output.
What Changed for a Steel Producer's Dispatch and Billing?
The steel producer made dispatch and billing 70% faster by reworking the steps that slowed each run, while billing documents stayed identical. Dispatch and billing sit at the point where physical goods meet money. Delays there hold up trucks and invoices at once.
Steel is a heavy, schedule-driven business. A truck waiting at the gate costs real money, and an invoice stuck in a queue delays cash. So a slow billing run hurts operations and finance together.
The team broke the problem into stages. First, they timed each step in the dispatch-to-billing chain. Then they found that a few steps consumed most of the elapsed time, so they focused there.
Why billing runs need extra care
Billing output has legal and financial weight. A changed tax line or a rounded amount can trigger customer disputes and audit questions. So the parity standard here was stricter than for a typical report.
The team compared billing documents field by field across a full test cycle. Document numbering, posting dates, and tax values were checked too. Only then did the faster version go live.
Connecting the plant floor to finance
Plant data feeds finance, and speeding up one side can strain the other. A US-based SAP system integrator can help connect plant data with finance runs, ensuring that a fix in one area does not break another. This matters most where shop-floor tools such as SAP Manufacturing Execution feed production confirmations into costing and billing.
Ongoing SAP Support Services also help here. After a tuning change, someone has to watch the first few cycles and catch drift early. Without that watch, a gain in March can erode by June.
How Did a Manufacturer Cut Statutory Reporting Time by Over 60%?
The manufacturer cut statutory reporting time by over 60% by tuning the extraction and processing steps behind its compliance files, with identical file contents. Statutory reports carry hard deadlines set by regulators, so a slow run puts the business at risk, not just the team's patience. For a comparable example of consolidation and group reporting work, see this PwC SAP Group Reporting case study.
Statutory files draw from many sources. Finance, tax, and logistics data all feed in, and a single slow extract holds up everything downstream. The team traced each source to find which one set the pace.
Here is what changed:
- Extracts were trimmed so each pulled only the fields the file needed.
- Duplicate processing that ran the same calculation twice was removed.
- Heavy calculations moved closer to the data.
- The largest jobs were scheduled away from peak user hours.
Each change had its own parity check. Because the output was a regulatory file, even a formatting difference mattered. The team compared file contents character by character before sign-off.
What the team did not touch
The reporting logic stayed as it was. Tax rules, mappings, and the layout the regulator expects were left alone. That boundary kept the risk low and the review short.
The "over 60%" figure is the floor, not the ceiling. Some steps improved more, and others improved less. Your own results will depend on your data volumes and the state of your code.
What These Results Mean for Your Next Close
You can recover hours at period end without a rebuild by ranking slow jobs, fixing them one at a time, and proving output parity after each change. The four projects above all followed that sequence. It works because it limits risk while it cuts runtime.
Here is a practical way to start:
- List every job and report that runs during your close.
- Record how long each takes and how often it runs.
- Rank them by total time, not by who complains loudest.
- Fix the top few, one change at a time.
- Compare outputs before and after, and keep the evidence.
Where deeper database work pays off
If your slowest jobs spend their time in the database, SAP HANA Performance Optimization is the next lever. It covers query design, indexing choices, and how data sits in memory. Teams that skip this step often find that code fixes plateau.
Cloud moves add another angle. Some businesses plan to shift workloads to SAP HANA Cloud solutions, and tuning first makes that move cheaper and smoother. A report that runs badly on premise rarely runs well in the cloud. Fix the habits before you move them.
If you want outside help, SAP Optimization Services from a partner can compress the measurement phase. You do not need a rebuild to recover hours at period end. A ranked list of slow jobs, a clear fix for each, and a parity check before sign-off will get you most of the way there.
Frequently Asked Questions
Q. What is a parity check in SAP performance work?
A. A parity check is a documented comparison showing that output after a change matches output before it. Teams run both versions on the same data and compare totals, rows, and sampled records. It protects auditors and finance users from silent errors.
Q. Are the results in these SAP performance case studies independently verified?
A. No. The figures are vendor-reported by 2iSolutions US and come from its own engagements. Ask for the measurement method and parity evidence before you build a plan around them.
Q. Do I need a new system to get faster reports?
A. Usually not. All four projects worked inside the existing SAP environment by fixing code, data access, and database behaviour. A rebuild only makes sense when the design itself blocks improvement.
Q. How do I decide which jobs to fix first?
A. Rank jobs by total runtime, which is duration multiplied by frequency. A short report that runs constantly can cost more than a long monthly one. Start with the top handful and measure again after each fix.
Q. Can tuning put my year-end close at risk?
A. It can if changes ship in bulk or without proof of matching output. Small, separate changes with a parity check each keep the risk low. Schedule them well before the close, not during it.
Why Proof Beats Promises Before Your Next Close
The four results share a plain method. Measure first, change one thing, prove the output matches, then move on. Footwear reports, cement ABAP code, steel billing runs, and statutory files all improved because teams stayed disciplined, not because they found a trick.
That method also gives you something to hold vendors to, including 2iSolutions US. Ask for the ranked job list, the change log, and the parity evidence. If a partner cannot show those, the headline number means little, and your next close will tell you quickly which kind of partner you hired.
Email us at [email protected] to see the case studies.
Want this applied to your SAP estate?
Tell us where you are and we'll come back with a concrete next step.
Talk to our team